In the process of exhibition rack production, a clear process is the basis to ensure that the project schedule is carried out as scheduled. Only by defining the manufacturing process can the goal be clear in the process of implementing each step. Following is an example of the production process of customized exhibition shelves.

、测量现场的尺寸

First, measure the size of the site

展示架制作属于定制型的产品，它不像是标准类型的产品一样，只要交钱买走就可以。所有的数据都是要根据现场的实际情况来进行定制的。只有确定了现场的实际尺寸以后才能够进行后期的材质开料的进行，这样制作出来的展示架也会跟客户的实际面积大小等相符合，不会浪费一点一滴的空间。

Showcase shelf production belongs to customized products, it is not like the standard type of products, as long as you pay for it. All data should be customized according to the actual situation of the site. Only after the actual size of the site is determined can the material opening be carried out in the later stage, so that the display rack produced will be in line with the actual size of the customer, and will not waste a bit of space.

第二、材质的选定

Second, Selection of Material

在选定相应的材质的时候也要根据客户实际想要摆放的产品属性来进行购买。比如如果是那种重量比较大的机械型产品，一定要使用抗压能力强的面板，比如钢制的面板的承重力就比较好。

When choosing the appropriate material, we should also purchase according to the product attributes that the customer actually wants to display. For example, if it is a mechanical product with larger weight, it is necessary to use a panel with strong compressive capacity, such as a steel panel, which bears better gravity.

第三、开料的进行

Thirdly, the process of opening materials

在确定了面板材质和尺寸以后就要根据尺寸来进行实际的开料处理了，这时候需要注意的是线条的优美和边缘的光滑性，这样做出来的产品才能够非常的美观。

After determining the material and size of the panel, it is necessary to carry out the actual cutting according to the size. At this time, we need to pay attention to the Gracefulness of the lines and the smoothness of the edges, so that the products can be very beautiful.

第四、展示架制作中漆面的处理

Fourth, the treatment of lacquer surface in the production of display racks

在进行漆面处理前要行表面的打磨，这里用到的打磨工具是砂纸，打磨的时候不能过于用力，也不能用力太小，这中间的力度只有经验丰富的师傅才能掌控好。在打磨完成以后要进行两次的上漆处理，这其中就包括了底漆和面漆的涂制，在涂抹的过程中一定要保持漆面的均匀性，这样晒干以后的表面会具有很好的光泽性。

Surface polishing should be carried out before finishing. Sandpaper is the tool used here. When polishing, we should not use too much force or too little force. Only experienced teachers can control the strength in the middle. After polishing, two painting treatments should be carried out, including primer and topcoat painting. In the process of painting, the uniformity of the paint surface must be maintained, so that the surface after drying will have a good gloss.

本文由定做展览展示架的小编进行整理编写，想要了解更多的产品及更详细的精彩内容，请关注我们的网站：http://www.fsczsj.com，我们十分感谢您的支持！

This article is compiled by a small edition of customized exhibition shelves. If you want to know more about the products and more detailed wonderful content, please pay attention to our official website: http://www.fsczsj.com. We thank you very much for your support!